摘 要:按2（Sr0.99，Eu^2＋0.01）O-0.16B2O3-0.84P2O5配料以固相法合成藍色熒光粉。該熒光粉在還原性氣氛中，分別在1100，1150，1200℃和1250℃下進行焙燒。對不同溫度下制成的樣品進行X射線衍射分析，確定樣品的晶體結構及晶相組成。通過測定樣品的激發光譜和發射光譜，研究了焙燒溫度對熒光粉結構的影響。結果表明：在1200℃下合成的熒光粉Sr6BP5O20為單一相，屬四方晶系，P4/mmm空間群，晶胞參數分別為α=0.9794nm；c=0．9516nm，對應發射譜中478nm的發射峰；在低于1200℃下合成的熒光粉中含有α-Sr3（PO4）2和α-Sr2P2O72個晶相，對應發射譜中420nm的發射峰。
關鍵詞:硼磷酸鹽；藍色熒光粉；光致發光；
Abstract:Blue phosphors with the formula of 2（Sr0.99. Eu^2＋ 0.01）O-0.16B2O3-0.84P2O5 were synthesized by a solid state reaction method. Phosphors were calcined at 1 100, 1 150, 1200℃ and 1250 ℃ under a reducing atmosphere. Photoluminescence spectra of these phosphors were measured. The effects of calcining temperature on structural variations of the phosphors were investigated. According to X-ray diffraction results, the crystal assembly of the sample calcined at 1200℃ is Sr6BP5O20 with a unitary tetragonal phase in the P4/mmm space group with the cell parameters a and c as 0.979 4 nm and 0.951 6 nm, corresponding to the emission at 478 nm. In the case of phosphors synthesized at temperatures lower than 1200℃, α-Sr3（PO4）2 and α-Sr2P2O7 phases were found with the emission at 420 nm.
Key words:borophosphate; blue phosphors; fluorescence spectra
As the most promising candidate to replace conventional fluorescent lamps，light．emi Ring diodes(LEDs) have been in dem and for solid．state lighting technology in recent years．L _o Although the simulated high．color．
rendering potential of light sources consisting Of 36I)_一400 nln ultraviolet LED (Uv．LED)and tricolor phos．phors has been reported an d experimentally confirmed，Lthere are currently insufficient references on the use of phosphor converted to UV LED as illumination sources．
T【lis is due to the relative novelty of the concept that tri．color phosphors can be applied fo r this purpose；they would have be excitated at around 36州00nli1 over a wide ban d ran ge an d have high quan tum efi ciency．Cur．rently,there has been little research on the use of phos．phor fo r UV．LED applications. |
